VAN, 4WD and CARAVAN FIT OUT







Start with an Energy Analysis
We guide you with choices to meet those needs.







Research how we ship Australia wide complete systems

MARINE 36V Battery System Powered by Scotty AI

But… It also provides 12V to run the boat when outboard is off.

Running Aircon in the Van for Days at a time Of Grid NO GENSET

But… you have to have Solar Backup with a Big DC DC charging from Vehicle like Scotty 1550W or 3000W

METEOR IP 66 PLUG-n-PLAY BATTERIES

24V, 36V or 48V
SIMARINE DIY MoNITORING SYSTEMS
You Dont need the large shunt for battery monitoring if you don't have an inverter. Our software configuration can setup your system with just the individual shunt products

Wagon Lifestyle Drawer Sets with Power Pack

Pre-built commissioned – ready to go

Scotty Ai vs 48V Alternator
SCOTTY AI REFIT ON PRIVELEGE Catamaran for Silent night on water

SCOTTY AI for SILENT NIGHTS

Privilege 51.5 owners wanted Silent Nights on the water. They also wanted to run “Zero Genset” and installed 3.2kW solar. The 12V DC loads are around 600W+ without winches/windless. A 48V 20kWh Lithium bank was installed as an energy overlay.

As a backup to solar two Scotty AI’s provide both a high replenishment capability and redundancy. When Scotty’s are off, the 12V alternators will continue to charge the existing 12V house battery.

With significant 12V loads, the available power to Scotty AI varies widely. Scotty AI’s patent pending auto-tuning maximizes the charging power prioritizing the 12V loads.

Should one alternator fail for some reason, the Scotty AI associated ceases operation automatically and the floating master role switches if required

The Smart Touch Display allows the skipper to set the alternator engine load to Soft, Medium or Hard depending whether motor sailing or solar back up power without running the Genset.

Read More…
Scotty AI in NEW Lagoon 460 catamaran as power Overlay

SCOTTY AI in NEW CATAMARAN

For new-built catamarans in the 36-46ft size, the factory fitted 12V lithium house battery bank stays as installed and Scotty AI and a large capacity additional house bank at either 24V or 48V is an overlay energy system.

When running the engines, Scotty AI is auto-tuned with the “lithium house” enabled. The patent-pending auto-tuning is done on either engine independently. Scotty AI is then ready to run.

With either or both engines running, Scotty Ai waits till the house battery is significantly charged at 90%+  before cutting in and extracting power up to 3000W per engine. (the factory fitted engines on popular brands have 120A capacity at 14.4V and the 1500W Scotty AI model is a perfect fit)

When the engines are off, Scotty AI delivers DC power back to the factory fitted 12V house bank to keep it always in the circa 90% band.

Read More…

Fishing Boat with Scotty AI bi-directional DC DC to 36V

SCOTTY AI with 36V in FISHING BOATS

Fishing boats with GPS-guided propulsion/autopilot packages and/or virtual anchor systems using high torque 36V motors have two options that significantly simplify a single house battery bank design:

    1. Scotty AI can simply provide the 24V or 36V load (generally up to 1500W is sufficient) on demand without the need for a 36V house battery. This can be from a single 12v house battery design.
    2. Scotty AI can simply charge a 24v or 36V Auxiliary battery and use the bi-directional feature to supply the 12V loads without the need for a 12V house battery.
    3. High loads, including up to a 3000W inverter can be used on the 12V side pulling power through Scotty AI from the 36V Auxiliary battery.
    4. The result is a simplified single auxiliary battery system.

SCOTTY AI in FISHING BOATS & GYRO

For outboard engines, the features above allow the engine to idle with little or no net output, then ramp up the power to a full 3000W at cruising RPM (provided the outboards have alternator capacity). This unique and innovative product allows fishing boats to run gyro’s and other high demanding loads with a battery bank being charged at the same time the gyro is running.

  • The vessel can leave the dock immediately if the gyro application is for a “restful night” at anchor later in the day.
  • Scotty AI allows the gyro power demand to have priority at any engine RPM
  • Once the gyro demand has reduced after spin up, Scotty AI will extract power for the auxiliary battery if required.
  • Once at anchor, Scotty AI will direct power from the auxiliary battery bank back to the gyro as it is fully bi-directional DC DC.
  • Scotty AI can direct up to 3,000W to the gyro and any other 12V (or 24V) loads.

Read More…

Sunseeker 80Ft with 24V Scotty Running Silent Night

SCOTTY AI in LARGER YACHTS

Scotty AI provides both a high replenishment capability with redundancy with 24V alternators at 150A each. Up to two of these per engine have been fitted giving 16kw capacity. Two Scotty AI’s per engine can charge at 12kW.

An 48V Lithium bank is installed as an energy overlay. The existing 24V AGM house bank is preserved.

Scotty AI is auto-tuned per alternator. When all Scotty AI units are activated a patent pending ‘floating master” is established between.

Should one alternator fail for some reason, the Scotty AI associated ceases operation automatically and the floating master role switches if required

If the Scotty AI’s are charging the 48V auxiliary battery and this operation is stopped, the vessel can continue to run on the 24V AGM house bank.

Installed systems include a 100kWh 48V house bank being replenished from 12kW Scotty AI array which is sufficient to run the saloon and helm aircon loads and electronics power while motoring NO Genset. “Silent Nights”

STAR-Ship Series: A lineup of digital switching products that seamlessly blend CAN wired and Bluetooth wireless at affordable price points.

The STAR-Ship series takes wireless connectivity to new heights. Each device is equipped with a Thread/Matter compliant chipset and utilizes the advanced 802.15.4 radio standard for Bluetooth 5.3, significantly extending your reach.

Setting up your STAR-Ship products is a breeze, requiring no laptop or smartphone when a larger touch display isn't available.

  • Use CAN connected IP67 rubberized key pad or 4 button saloon style switch.
  • Use up to 6 Bluetooth 5.3 wireless 4 button switches in parallel.
  • Digitally switch lights in dual-colour or RGBW.
  • Digital switch devices up to 35A per channel and 150A in total.
  • Slash your installation wiring time in half.
  • Decrease the number of light switches by 50%, especially when dual color is needed.
  • Offer customizable color control for RGBW, putting you in charge of your ambiance.
Starship Family
STAR-light LED control from CAN wired and/or wireless switches

STAR-light

STAR-light Controls up to 8 Switched & Dimmable 12V LED’s

STAR-light is only 60mm across and 25mm deep with a 12 pin plug. Each circuit is designed for 3.5A with 16A maximum per module. This delivers compact lighting solution close to lighting devices not necessarily at a central wiring point.

Multiple Remote Switches Control with both CAN wired and BLE Wireless

Unlike units that use wired or wireless, STAR-light utilizes two parallel communication channels. Both can operate simultaneously giving wired control with parallel wireless for up to 6 multiple switches per LED channel. This reduces the complexity and cost of wiring multiple switch points for customer convenience.

Unbeatable Lighting Polarity Choices with Segmented Control

STAR-light implements 8 LED switching and dimming channels that control 4 positive and 4 negatively controlled LED lights. The 4 negatively switched channels can be a single RGBW with user selectable colour. This delivers affordable digital switching using a wide range of lighting choices on either polarity.

Advanced Flexible Switching and Dimming Modes

A single remote button can be easily configured to switch 2 circuits. Single press and dim for one, double press to switch to a second colour or even RGBW and dim. Two outputs from one switch. STAR-light dim LED’s from 40W max all the way down to 10%. This gives softer evening lighting to suit suit ambient needs, making your life easier and more convenient. For larger LED’s to 400W choose our STAR-control module.

Elevate Your Safety and Efficiency with Our Next-Gen STAR-light Module

Digital switching systems that utilize MOSFETS to control electrical outputs represent an advancement over traditional fuses and breakers. However, potential risks remain if there is electrical abuse on a lighting circuit. STAR-light, a new modular system, implements layered redundancies and current enabled protections to deliver unmatched safety, flexibility, and ease of use.

Hassle-Free Setup and Provisioning

Forget about the cumbersome setup processes that require laptops or smartphones. With our STAR-light Module, all you need are the push buttons on the unit itself. You can connect up to 6 remote operated switch buttons, either CAN-connected or via Bluetooth, offering you versatile two-way to six-way switching options. Multiple wired and wireless switch buttons can be easily paired in any combination.

Buy STAR-light Product Here
STAR-power

STAR-power

All in One 12 channel Digital Switching Power with Safety and Efficiency

Digital switching systems that utilize MOSFETS to control electrical outputs represent an advancement over traditional fuses and breakers. Unlike units that either have many low current channels and few high-power channels, STAR-Control sports 6 x 35A and 6 x 10A dimmable channels at 12V. Capable of 150A continuous and 180A surge, each channel delivers unmatched safety, flexibility, and ease of use.

Smart Current Management with AI

For maximum safety, STAR-control learns to differentiate between high in-rush and short-circuit currents. During the initial setup, the system measures and analyses the start-up and running currents, setting a smart fuse limit that adapts to your needs. From this machine learning, the smart AI automatically sets optimal current limits and in rush time outs for the ultimate in safety. Say goodbye to the complexities of manual programming!

Unbeatable Redundancy with Twin CPUs and Segmented Control

STAR-Control implements two interconnected CPUs. Each controls six of the MOSFET channels, providing redundancy if one CPU fails. This delivers safer segmented operation rather than total system shutdown.

Unmatched Modes of Communication with Integrated CAN and Bluetooth

Any channel can be switched by either CAN based switches or Bluetooth switches or devices or both. This reduces installation time with any dual switching requirement. It also simplifies “master” on/off control.

Hassle-Free Setup and Provisioning

Forget about the cumbersome setup processes that require laptops or smartphones. With our STAR-Control Module, all you need are the push buttons on the unit itself. You can connect up to 6 remote operated switch buttons, either CAN-connected or via Bluetooth, offering you versatile two-way to six-way switching options. Multiple wired and wireless switch buttons can be easily paired in any combination.

Advanced Flexible Dimming Modes

For lighting circuits, STAR-Control can dim LED’s all the way up to 400W. This eliminates the need for duplicating high power work lights with softer evening lights. With our advanced 4 button STAR-switch circuits, STAR-control adjusts brightness levels to suit ambient needs, making your life easier and more convenient.

By combining segmented MOSFET redundancy, intelligent measurements, modular CPU architecture, and AI-assisted setup, STAR-Control aims to deliver the next generation in user-friendly, safe, and robust digital switching. The system exemplifies how smart protections and machine learning can enhance electrical controls.

STAR-switch 8 button CAN rubberised

STAR-switch 8 Button CAN

Introducing the STAR-switch IP67: An innovation in rugged, reliable, and responsive control.

Key Features:

STAR-switch external is a robust 8-Button Switch Block: Built to withstand the toughest conditions.
• Compact Design: Measuring just 105mm x 63mm x 16mm with an additional 22mm for the plug.
• Secure Installation: Fastened securely with 2 x M6 bolts.
• Weatherproof: Sealed to IP67 for protection against dust and water.
• Wired Connectivity: Operates at 12V with CAN.
• Backlit Press Buttons: For easy operation in low-light conditions. Notably, these are tactile buttons, not capacitive touch.
• Rubber Encapsulated Surface: For enhanced durability and user comfort.
• Tri-Color LED Indicators: Clear indication for On/Off/Fault statuses.
• Custom Engraving: Personalize your switch block for easy identification.
• Multi-Function Buttons: Single press for one channel, hold to dim. Double press to switch LED to a second color or RGBW channel.
• Reliable Connection: Features a Deutsch plug 4-pin connector on the rear.
• Parallel Switching: Each button can be wired in parallel for 6-way switching.
• Adjustable Brightness: Dimmable LED indicators for optimal visibility.
• Resilient: Vibration and impact-resistant for long-lasting performance.
• Wide Operating Temperature Range: From -40oC to +85oC.
• Long Lifespan: Tested for up to 1,000,000 cycles per key.
• Multiple Key Press Combinations: Supports various key press combinations for enhanced functionality.

Experience the STAR-switch IP67– the epitome of rugged sophistication in switch technology.

Buy STAR-switch Here
STAR-switch 4 button CAN and Bluetooth

STAR-switch 4 Button CAN & Wireless Bluetooth

Unveiling the STAR-switch Interior: A sleek and versatile control solution for digital switching.

Key Features:

  • STAR-switch Interior is a compact 4-Button Interior Switch: Designed for seamless integration for switching LED’s and/or 12V devices.
  • Sleek Dimensions: With a profile of 60mmW x 94mmH x 3mmD and an additional 22mm behind.
  • Stylish Matt Black Housing: Offers a sleek, modern aesthetic to complement your interior decor.
  • Wired and Wireless Connectivity: Equipped with both wired and Bluetooth wireless options for ultimate flexibility.
  • Power and Output: Operates at 12V In with CAN out.
  • Personalized Engraving: Customizable with 2 lines of up to 7 characters each.
  • Multi-Function Buttons: Single press for one channel, hold to dim. Double press to switch LED to a second color or RGBW channel.
  • Parallel Switching: Each button can be wired in parallel for 6-way switching.
  • Backlit Press Buttons: Enhancing visibility and ease of use. Note, these are tactile buttons, not capacitive touch.
  • Dimmable Backlighting: Backlit features that adjust in brightness with the LED.
  • Wide Operating Temperature Range: Functional from -40oC to +85oC.
  • Long-Lasting: Tested for up to 1,000,000 cycles per key for enduring performance.
  • Multiple Key Press Combinations: Supports varied key press combinations for enhanced functionality.
  • Secure Installation: Affixed firmly pop-in spring clips lets you install in blind cavity.
Buy STAR-switch here
STAR-switch 4 button CAN and Bluetooth

STAR-switch 4 Button Battery Wireless Bluetooth

Unveiling the STAR-switch Interior Battery: A sleek and versatile control solution for digital switching.

Key Features:

  • Compact 4-Button Interior Switch: Designed for seamless integration for switching LED’s and/or 12V devices.
  • Sleek Dimensions: With a profile of 60mmW x 94mmH x 3mmD and an additional 22mm behind.
  • Stylish Matt Black Housing: Offers a sleek, modern aesthetic to complement your interior decor.
  • Wireless Connectivity: Equipped with both wired and Bluetooth wireless options for ultimate flexibility.
  • Battery Power only – estimated at 1-3 years depending on use.
  • Personalized Engraving: Customizable with 2 lines of up to 7 characters each.
  • Multi-Function Buttons: Single press for one channel, hold to dim. Double press to switch LED to a second color or RGBW channel.
  • Parallel Switching: Each button can be wired in parallel for 6-way switching.
  • Backlit Press Buttons: Enhancing visibility and ease of use. Note, these are tactile buttons, not capacitive touch.
  • Dimmable Backlighting: Backlit features that adjust in brightness with the LED.
  • Wide Operating Temperature Range: Functional from -40oC to +85oC.
  • Long-Lasting: Tested for up to 1,000,000 cycles per key for enduring performance.
  • Multiple Key Press Combinations: Supports varied key press combinations for enhanced functionality.
  • Secure Installation: Affixed firmly pop-in spring clips lets you install in blind cavity.
Buy STAR-switch here

STAR-touch

Introducing the Safiery STAR-touch Compact 55mm Round Display: A revolution in user experience and smart device integration.

Key Features:

• All-In-One Device: Seamlessly integrates battery monitor, DC DC monitor, alternator monitor, digital switching, and radar tank sensor levels into one compact unit.
• Wired and CAN Connectivity: Operates on 12V and uses a Marine NMEA cable for robust connections.
• Sunlight Readable Display: Features an optically bonded display and touchscreen for excellent readability even under bright sunlight.
• High-Resolution Touchscreen: Built with PCAP ITO for precise touch response.
• Device Consolidation: Replaces a variety of traditional user input devices such as switches, keypads, pushbuttons, displays, etc., offering a simple, user-friendly interface.
• Compact Footprint: Designed for optimal space efficiency on your front panel.
• Gesture Support: Recognizes Tap, Swipe, and Turn gestures for intuitive navigation.
• High-Resolution Display: Offers a crisp display with 330 PPI (320 X 300).
• Comprehensive Monitoring: Displays CAN BMS Battery voltage, SOC%, Scotty AI Power, and alternator temperature.
• Customizable Settings: Allows users to adjust Scotty AI to “soft,” “medium,” and “hard” settings while idling, or turn it “off” entirely.
• Intelligent Backlight: Dims to 30% after a preset time to save energy.
• Temperature Resilient: Operates within a range of -20 to 65 °C and can be stored between -30 to 70 °C.
• Humidity Resistant: Can withstand up to 95% humidity at 65 °C.
• Shock Resistant: Meets ANSI EP455 5.14.1 standards for mechanical shock resistance.
• Weatherproof Seal: Electronics are sealed to IP67 for protection against dust and water.

Experience the future of smart device control with the Safiery STAR-touch Compact 55mm Round Display. It’s not just a device; it’s a revolution in user experience.

Buy STAR-touch

STAR-solo

Introducing STAR-solo: Your seamless connector for the Victron eco-system and beyond.

Key Features:

• Seamless Integration: Connects effortlessly with the Victron eco-system, Safiery Integrated Display, Safiery Touch Display, Safiery TPMS, STAR-light, STAR-control, and STAR-tank.
• Ethernet Connectivity: Connects to the Victron Cerbo via an ethernet port for reliable data transfer.
• Advanced Software: Safiery software expertly maps Victron Modbus Control registers from Modbus to CAN for efficient communication.
• Two-Way Control: Provides comprehensive control of all allowable modbus registers in Cerbo.
• Pre-Calculation Module: Comes equipped with a pre-calculation module and programming modules for CAN devices, ensuring that CAN output is pre-processed for optimal performance.
• Power Versatility: Operates on both 12V and 24V power sources.
• CAN Connection: Offers a CAN connection for robust interfacing with other devices.
• Bluetooth Enabled: Provides wireless connectivity via Bluetooth for added convenience.
• RS485 Port: Comes with an RS485 port for additional connectivity options.

Discover STAR-solo – your gateway to a seamlessly connected Victron eco-system. Enhance your control, streamline your operations, and experience the future of connectivity today.

STAR-tank Radar Sensor for Black, Grey and Fresh Water

STAR-tank

Introducing our breakthrough tank level measurement solution, utilizing pulsed coherent radar at an impressive 50Ghz.

This innovative radar level measurement system emits and receives a microwave signal, with the return time of the signal directly correlating to the distance between the radar system and the material surface.

Our pulsed coherent radar technology offers numerous benefits. It delivers highly precise measurements, even under challenging conditions such as extreme temperatures, pressures, or dusty environments. It’s capable of measuring levels in large tanks and over long ranges, all while remaining unaffected by changes in the material’s properties, like its dielectric constant – a common source of inaccuracies in other level measurement systems.

We offer two versatile models:
– A wired model with 10-30V power and 0-5V output, along with CAN.
– A wireless model powered by a battery (with a lifespan of 2-3 years) and featuring Bluetooth advertisement output.

Our system can measure ranges from 30mm to 2000mm with a typical accuracy of 2.5mm, making it ideal for black water tanks that may have foam on top.

Experience unparalleled precision in tank level measurement with our cutting-edge pulsed coherent radar technology.

.

Buy STAR-tank here

RV SOLAR

Fixes Easily

MARINE SOLAR

Glass or Flexible

PORTABLE SOLAR

175W Modules - 3kg

TANK and INSTANT HOT WATER

8 L Tank 48V 70C 1000W TANK

3000W to 6000W INSTANT

POWER & TEMPERATURE RESULTS

 

3000W to 6000W INSTANT

Marine Tank Level Sensor with Phased Coherent Radar

Product #11 - 14 Marine Tank Sensors

  • Fresh water is easy, every sensor can do
  • Grey and Black Water are difficult, only new STAR-tank Radar sensor will do.

The Value of Safiery Sensors is:

  • Each sensor is suitable for 12V or 24V power.
  • Compatible with any channel on Victron Tank 140.
  • Tank level Sensors IP67 and IP68 have breather tube incorporated in electrical cable for true differential pressure readings.
  • STAR-tank Phased Coherent Radar is a game changer for black water and grey water sensors. The radar signal penetrates foam on black water. Solids are less interference than any other sensor.
  • STAR-tank battery operated Bluetooth is compatible with Bluetooth reading devices with BLE 5.3 advertisement.
STAR-tank Radar Sensor for Black, Grey and Fresh Water

Phased Coherent Radar

This is our new STAR-tank product. It is available in Nov 2023.

Very accurate tank level measurement using pulsed coherent radar at 50Ghz.

Radar level measurement sends/receives a microwave signal. The time it takes for the signal to return is proportional to the distance between the radar system and the material surface.

Pulsed coherent radar has several advantages. It provides highly accurate measurements, even in challenging conditions such as high temperatures, pressures, or dusty environments. It can also measure levels in large tanks and at long ranges. Moreover, it is not affected by changes in the material’s properties, such as its dielectric constant, which can cause inaccuracies in other types of level measurement systems.

  • Wired with 10-30V power.
  • Output of 0-5V as well as CAN and Bluetooth advertisement.
  • Range from 30mm to 2000mm with typical accuracy of 1mm
  • Perfect for black water tanks that can have foam on the top.
Not Available to buy till Nov 2023 Release at METSTRADE Amsterdam Show.
Tank level Sensor IP67

Pressure Level Sensor

Side Screw in to tank or to T-piece on tank drain.

TRUE differential pressure transmitter with secondary side breathing in proprietary tube included in sensor wiring sheath. 

316 SS G 1/4 thread 0-1000mm standard, custom order with greater range welcome.

Accuracy 2% of Full Scale.

10-30V Power input

0-5V Signal Output

Matches either Victron Tank 140 or Simarine

Perfect for fresh water tanks and fuel tanks.

Click here to Buy
Drop in IP68 Pressure tank level Sensor

Pressure Level Drop into Tank IP68

Drop into tank IP68 316 SS

TRUE differential pressure transmitter with secondary side breathing in proprietary tube included in sensor wiring sheath. 

0-1000mm standard, custom order with greater range welcome.

Accuracy 2% of Full Scale.

10-30V Power input

0-5V Signal Output

Matches either Victron Tank 140 or Simarine

Perfect for fresh water tanks only.

Click here to Buy

Ultrasonic Under Tank

Glue underside of tank

TRUE ultrasonic through bottom of tank. Must be only one layer between sensor and fluid.

0-1000mm depth

Accuracy 4% of Full Scale.

10-30V Power input

0-5V Signal Output

Matches either Victron Tank 140 or Simarine

Perfect for fresh water tanks only.

Click here to Buy.

Full Power and big battery bank is now available for 4WD's without Canopies

Power packs for 4WD Tubs/ Trays Meteor Lithium IP66 in Rear

Follow us on Instagram and Youtube