Safiery Induction Dual Hob Cooktop — suits 2000W inverter (no pulsing)

Dual-hob induction (1800W + 1300W, limited to 2000W overall) on a 10A plug, with a Schott Ceran crystal top. No pulsing.

The Safiery Induction Dual Hob Cooktop is a two-zone, benchtop-mount induction cooktop built for marine vessels, RVs and caravans, and off-grid builds running on a 2000W inverter. Most domestic induction cooktops draw 2400W or more and will trip a 2000W inverter; this cooktop's two hobs (1800W and 1300W) are sized to a 2000W combined limit instead, so it runs on the power system you likely already have. What separates it from cheap induction units is how it delivers that power. Budget cooktops simulate lower heat by rapidly switching full power on and off, causing uneven cooking, audible clicking, and electromagnetic interference that's unwelcome near marine or RV electronics. This cooktop instead runs true continuous power across its full 300W-2000W range, including a genuine low simmer at 300W with no open flame, which is also why it's approved for outdoor use under a Total Fire Ban. It's rated at 94% cooking efficiency, against roughly 70% for conventional electric and 40% for LPG gas, and will boil 0.5L of water in about 2 minutes at 1800W. Under the German Schott Ceran black crystal glass top, it carries independent SAA certification on both the appliance and its power circuitry, runs on a standard 240V/10A connection, and needs a 497 x 270mm cutout in a 520 x 290 x 55mm footprint at 5.1kg. Standard safety features apply: child lock, auto-off, overheat protection, and empty-pan detection. Compared with the Safiery Induction Single Hob Cooktop, which shares the same 2000W-inverter compatibility but has one zone, choose this dual hob for two pans at once; the Safiery USA Dual Hob Induction Cooktop covers the equivalent setup for 110V markets. Any ferromagnetic cookware works, including cast iron, enamel-coated iron, carbon steel, or magnetic stainless steel; a magnet sticking firmly to the pan base confirms it will work.

About this product

A two-zone induction cooktop that runs on the 2000W inverter you already have, delivers real continuous power instead of switching full power on and off, and puts 94% of what it draws into the pan.

Two hobs, 1800W and 1300W, held to a 2000W combined limit. That limit is the product: a domestic cooktop asking for 2400W or more will trip a 2000W inverter, and the usual fix is a bigger inverter and a bigger bank. This one is sized to the system instead.

Because there is no flame, there is nothing for a Total Fire Ban to prohibit - which is the difference between cooking and not cooking on a lot of Australian summer days. Under the German Schott Ceran black crystal top it carries independent SAA certification on both the appliance and its smooth-power circuitry.

Sized to the inverter you already have

Most domestic induction cooktops draw 2400W or more, which is enough to trip a 2000W inverter halfway through dinner. That is why generic induction so often fails in a boat or a van and gets blamed on induction itself. These are built to a 2000W ceiling instead, so they run on the system already under your floor rather than demanding a bigger one.

Real low heat, not full power flickering on and off

Many low-cost induction hobs have one real output: full. They fake a lower setting by switching that output on and off, which is why they click, and why a sauce catches on one side of the pan and stays cold on the other. These deliver continuous power at whatever level you set, so a simmer is genuinely a simmer.

It still cooks under a total fire ban

Nothing burns, so there is no flame to be banned. On a fire-ban day the gas stove is off and this is not, which over an Australian summer is a meaningful number of dinners. It is the same reason it is comfortable in an enclosed galley: no combustion, no flue, no bottle to swap and no gas to leak.

94% of it ends up in the pan

Induction heats the pan directly instead of heating a surface and hoping the pan picks it up. Rated at 94% cooking efficiency against roughly 70% for conventional electric and about 40% for LPG, which is the difference between spending your battery on dinner and spending it on warming the galley. It boils half a litre in about two minutes at 1800W.

Works with

  • 2000W inverter — What the whole range is sized around
  • Lithium house bank — Runs off the battery, no gas bottle
  • 240V, 10A plug — Standard connection
  • Aluminium, copper or glass cookware — Not supported

Specification

Power

Hob power
1800W + 1300W, limited to 2000W combined
Continuous range
300W-2000W, true continuous (no pulsing)
Electrical connection
Standard 240V, 10A plug

Performance

Cooking efficiency
94% (vs ~70% conventional electric, ~40% LPG)
Boil performance
0.5L in approx. 2 minutes at 1800W

Fit

Overall dimensions
520 x 290 x 55 mm
Cutout size
497 x 270 mm
Weight
5.1 kg
Cooktop surface
German Schott Ceran black crystal glass

Approvals and safety

Certification
SAA-220357-EA & SAA-201744-EA (cooktop + smooth-power circuitry)
Safety features
Child lock, auto-off, overheat protection, empty-pan detection
Cookware
Ferromagnetic only

Questions

Can I really use it during a fire ban?

Yes. A Total Fire Ban restricts open flame, and induction has none - it heats the pan by magnetic field, with no combustion at all. That is what makes it usable outdoors on days a gas burner is not.

What size cutout do I need?

497 x 270 mm, for an overall unit of 520 x 290 x 55 mm at 5.1 kg.

Will it trip my inverter?

Not if the inverter is 2000W or better. The combined draw is capped at 2000W, which is the reason this range exists - most domestic induction cooktops ask for 2400W or more and trip a 2000W inverter under load.

What cookware do I need?

Anything ferromagnetic: cast iron, enamel-coated iron, carbon steel, or magnetic stainless steel. If a fridge magnet sticks firmly to the base of the pan, it will work. Aluminium, copper and glass will not.

What does "no pulsing" actually mean?

Many low-cost induction cooktops have one real power level - full - and imitate lower settings by switching it on and off. That is what causes the clicking and the uneven heat across the base of the pan. These deliver continuous power at the level you select instead.

SKU
INC280018001
Category
Induction & Hot Water
Price
$640.00 AUD inc. GST
Availability
In stock

More in Induction & Hot Water

All Induction & Hot Water