Technical Specifications
Model | Safiery 4.8kWh |
Battery Type | LiFePO4 |
Nominal Battery Energy | 4.8kWh |
Nominal Capacity | 100Ah |
Nominal Voltage | 48V |
Operating Voltage | 42 ~ 54V |
Recommended Charge & Discharge C Rate | 0.5C CAN BMS drives Charge Current Limit |
Recommended Charge/Discharge Current | 50A CAN BMS drives Discharge Current Limit |
Max Continuous Charge/Discharge Current | 75A CAN BMS drives Discharge Current Limit |
Peak Power Charge/Discharge Current | 100A (15s) |
Depth of Discharge (DOD) | 90% |
Net Weight | 44kg |
Dimension[W*D*H] | 504 Wide 597 High 155 mm Deep |
Charging Temp. Range | 0~55oC |
Discharging Temp. Range | -20~55oC |
Communication | CAN/RS485/RS232 Victron Compliant |
Cycle Life[1] | ≥6000 Cycles |
Protection Level | lP20 |
Expansion | Up to 30 units in parallel |
Pros | Can be used in both off-grid and hybrid setups, compact design |
Certification & Safety Standard | UN38.3/CE-EMC/IEC62619/IEC60730/CEI-021/GOST-R/UKCA |
Compatible Inverters | SMA/Victron/Ingeteam/Delios/Goodwe/Solis /Deye/SAJ/Voltronic/Sungrow etc. |
[1]Test conditions: 0.2C Charging/Discharging, @25oC, 80% DOD
- Slimline at only 155mm deep, 597mm high and 504mm wide. This makes it well suited as a single battery on the front wall of a canopy where height is less of an issue.
- A single battery perfectly matches a 3000VA Victron Inverter/Charger in charge and discharge current limits.
- Uses the same CANbus protocol used by Victron
- Has wall and floor supports that bolt onto the battery (see image right)
- Is from the same manufacturer as the 2.4kw of which we have supplied over 1,000 at May 26th 2022
Product Name |
Dyness 2.4kWhr 48V Battery Equivalent to 48V 50 Ahr Rack or Vertical Floor Mount |
Dyness 2.4kWhr 48V Battery Equivalent to 48V 50 Ahr Floor Mount |
Dyness 4.8kWhr 48V Battery Equivalent to 48V 100 Ahr |
Product Image |
|||
Battery Type |
Lithium-ion Lithium Iron Phosphate |
Lithium-ion Lithium Iron Phosphate |
Lithium-ion Lithium Iron Phosphate |
Nominal Storage |
2.4kWhr |
2.4kWhr |
4.8kWhr |
Usable Storage Capacity |
2.16kWh (90% DOD) |
2.16kWh (90% DOD) |
4.4kWh (90% DOD) |
Features |
Can be parallelized up to 144 batteries Leading battery becomes host and communicates with other batteries via canbus Can be used in both off-grid and hybrid setups, compact size, modular expansion. Battery is warranted to 55°C ambient |
Can be parallelized up to 144 batteries Leading battery becomes host and communicates with other batteries via canbus Can be used in both off-grid and hybrid setups, compact size, modular expansion. Battery is warranted to 55°C ambient |
Can be parallelized up to 40 batteries Leading battery becomes host and communicates with other batteries via canbus Can be used in both off-grid and hybrid setups, compact size, modular expansion. Battery is warranted to 55°C ambient |
Weight |
22kg |
22kg |
44kg |
Power |
1.75kW Continuous, 2.4kW Peak per battery |
1.75kW Continuous, 2.4kW Peak per battery |
3.75kW Continuous, 5kW Peak per battery |
Dimensions (WHD) |
44cm x36cm x 9cm Additional “ears” for support as 4cm in width if used |
44cm x36cm x 9cm Additional “ears” for support as 4cm in width if used |
50.4cm x59.7cm x 15.5cm Additional wall/floor mounts increase width |
Off-grid Capable? |
Yes |
Yes |
Yes |
IP rating |
IP 54 (canbus to be sealed) |
IP 54 (canbus to be sealed) |
IP 54 (canbus to be sealed) |
Operating temperature range |
up to 50°C |
up to 50°C |
up to 50°C |
Warranty |
Fixed in Home: 6,000 Cycles at 80% DOD at 0.2C charge/Discharge rate 10 Years Warranty. Mounted in Marine/RV: No Cycle warranty 5 Years (Limied to Product repair/ replacement) |
Fixed in Home: 6,000 Cycles at 80% DOD at 0.2C charge/Discharge rate 10 Years Warranty. Mounted in Marine/RV: No Cycle warranty 5 Years (Limied to Product repair/ replacement) |
Fixed in Home: 6,000 Cycles at 80% DOD at 0.2C charge/Discharge rate 10 Years Warranty. Mounted in Marine/RV: No Cycle warranty 5 Years (Limied to Product repair/ replacement) |
Warranty Document Supplied? |
Yes |
Yes |
Yes |
Spec sheet supplied? |
Yes |
Yes |
Yes |
BMS Compatible with Australian Approved Victron inverter/ Charger. |
Yes |
Yes |
Yes |