Quasar Glass Power + Inverter: adds the Victron Phoenix Inverter 12/2500 230 V Smart

Quasar Glass Power with 230 V on board: the Phoenix Inverter 12/2500 Smart (2,500 VA, 2,000 W continuous) joins the Victron 50 A kit, all read from Bluetooth with no GX device, and the screen gains an AC page.

Quasar Glass Power + Inverter is the Power package with 230 V on board. The Victron Phoenix Inverter 12/2500 230 V Smart (2,500 VA, 2,000 W continuous) joins the Orion XS 12/12-50 A DC-DC charger, Blue Smart IP22 12/30 mains charger, SmartSolar MPPT 100/30 and SmartShunt 500 A, and the glass reads all of them from their own Bluetooth broadcasts with no GX device anywhere. The screen gains an AC page showing the inverter's state, AC power, voltage and current beside the power tiles. Monitor everything, control Safiery: switching the inverter on and off from the glass is not offered, because the Bluetooth broadcast is listen-only; local inverter control stays in VictronConnect, and full Victron control with conversation is the Quasar ONE upgrade. If you need 3,000 W and want inverter mode and the shore limit controlled from the tile, choose Power + Cerbo. The switching side is the Control package exactly: one STAR-Light V2 with twelve dimmable channels, one Quasar Glass 4 panel and the dual-band 4G router, pre-paired at our bench with a quick-start card carrying one QR code. The free Quasar Glass App shows the same Power and AC pages on your phone, and every Control option attaches here too. Victron equipment is supplied by Safiery as part of the package on the one invoice.

About this product

Quasar Glass Power with 230 V on board: the Phoenix Inverter 12/2500 230 V Smart joins the Orion XS 50 A DC-DC, IP22 mains charger, SmartSolar MPPT 100/30 and SmartShunt, all read from their own Bluetooth broadcasts with no GX device. The screen gains an AC page showing the inverter's state, AC power, voltage and current beside the power tiles. Monitor everything, control Safiery: still read-only, still nothing cabled to the glass.

The Phoenix 12/2500 Smart is 2,500 VA with 2,000 W continuous. Its state, AC output power, voltage and current arrive on the glass and in the free Quasar Glass App from its own Bluetooth advertisement, the same way the rest of the kit is read. Switching the inverter on and off from the glass is not offered - the Bluetooth broadcast is listen-only - so local control stays in VictronConnect, and full control is the Quasar ONE upgrade.

If you need 3,000 W and want the inverter controlled from the tile, look at Power + Cerbo instead: it swaps the IP22 charger and this inverter for a MultiPlus-II 12/3000 inverter/charger on a Cerbo GX.

The inverter, live, beside the power tiles

A fifth page shows the Phoenix Inverter: state, AC output power, voltage and current, decoded from the inverter's own Bluetooth advertisement. Beside it the Power page carries the Orion XS charge current, the MPPT's solar power and yield, the IP22's mains charge state and the SmartShunt's state of charge. No gateway, no GX, nothing cabled to the panel.

Twelve channels on glass, pre-paired

The STAR-Light V2, the Quasar Glass 4 panel and the Quasar Glass Router arrive already on the kit's private network: router and controller on your always-on circuit, power up in any order, and every channel is live on the glass within about a minute. Three swipe pages of tiles, press and hold to dim, scenes on a long press, and the same tiles in the free app.

Works with

  • The Victron kit in the box, including the inverter — Instant Readout decoded on the glass and in the app, read-only
  • Victron Cerbo GX (yours) — Ethernet to the router, Modbus TCP
  • Apple Home and Google Home — STAR-Light runs Matter
  • STAR-Tank radar level sensors — One sensor per tank
  • Tyre pressure, incline and Safiery solid-state batteries — Through a STAR-Rover-4 CAN peer
  • Switching the inverter from the glass — Bluetooth is listen-only; VictronConnect, or Power + Cerbo

Specification

Victron kit

Inverter
Phoenix Inverter 12/2500 230 V Smart: 2,500 VA, 2,000 W continuous
DC-DC charger
Orion XS 12/12-50 A
Mains charger
Blue Smart IP22 12/30, 230 V
Solar charger
SmartSolar MPPT 100/30
Battery monitor
SmartShunt 500 A / 50 mV
How the glass reads them
Bluetooth Instant Readout, read-only

STAR-Light V2 controller

Channels
12 x 10 A (40 A total)
Dimmable channels
8 of 12, plus 2 RGBW colour outputs
Protection
Fuseless; opens a short within 80 microseconds

Quasar Glass 4 panel and router

Screen
4-inch 480 x 480 Android touchscreen, 9 to 24 V DC
Router
Dual-band Wi-Fi, 5 x Gigabit Ethernet, 4G module per region, 9 to 36 V DC

Questions

Can I switch the inverter from the screen?

No. The Phoenix Smart's Bluetooth broadcast is listen-only, so the glass shows its state, power, voltage and current but cannot switch it. Local control is VictronConnect; Power + Cerbo controls inverter/charger mode and the shore limit from the tile; full control is the Quasar ONE upgrade.

Is 2,000 W enough?

The Phoenix 12/2500 Smart is 2,500 VA with 2,000 W continuous. If you need 3,000 W, or a charger and inverter in one unit, choose Power + Cerbo with the MultiPlus-II 12/3000.

Do I need a Victron GX device?

No. Every Victron item in this package is read from Bluetooth. A Cerbo GX is what adds control, and devices without Bluetooth.

Is the Victron equipment priced separately?

No. It is supplied by Safiery as part of the package on the one invoice, at the one package price.

SKU
QG-POWER-INV
Category
Quasar Glass
Price
$3265.90 AUD inc. GST
Availability
Made to order

More in Quasar Glass

All Quasar Glass