Switches & Lights
GUIDE TO YOUR CHOICES IN SWITCHING
| CLASSIC SWITCH 4 Channel | SMART SWITCH 4 Channel | STAR-light SWITCH 8 Channel | STAR-power SWITCH 12 Channel | |
| 1. Canopy Doors and Inside light and one rear or side light plus water pump. Fridge is wired into fuse (we don’t recommend switches for fridge control in the unlikely event a member of your party accidentally turns off) | YES With Gas Strut Switch | |||
| 2. Canopy Doors and Inside light and one rear or side light plus water pump but with dual switching from either side of canopy | YES With Gas Strut Switch Add second engraved Smart Switch | |||
| 3. As setup 2 above but add side work lights plus rear work light and under body lights | Yes up to 8 LED Channels to 3.5A each. Add Rubberized 8 button switch in multiple locations | |||
| 4. As setup 3 above but add 12V oven, 12V 200W hot water, single compressor, big sound system, Roof Top tent Power for charging | Yes up to 6 LED Channels to 10A each PLUS 6 channels at 35A each. Add Rubberized 8 button switch in multiple locations Add Wireless Bluetooth 4 button switch inside RTT | |||
| 5. As setup 4 above but add RGBW Lighting for any colour selection | Yes Add to this for RGBW control | |||
| 6. As setup 4 above but have jack off canopy and need control of work lights in the vehicle to continue to be controlled with or without the jack-off canopy. | Yes One module in the vehicle and a STAR-light in the canopy or the other way round. Use Bluetooth STAR-switch Interior to operate between the two. | Yes One module in the vehicle and a STAR-light in the canopy or the other way round. Use Bluetooth STAR-switch Interior to operate between the two. | ||
7. 4WD Cab/Dual cab with tub or tray only and no canopy. This can be done easily with the waterproof rubberized 8 button keypad in the rear of the tub near the tail gate. Add the STAR-light or STAR-power behind the second row seats. Add and additional STAR-switch inside the cab on the upper or lower console. You now have two way switching from inside the cab and outside at the tub rear. Add the NEW Meteor IP66 48V battery system in the tub with the integrated Scotty AI Meteor and you have both 125A of DC DC charging power PLUS 125A at 12V available all the time for fridge, lights, compressor without the vehicle running. Add a slimline Inverter/charger in the cab under the rear seat or behind it. | YES | YES | ||
| Add Custom Engraved Switches | NO | YES | YES | YES |
| Waterproof rubberized with LED 8 button with two wire CAN connection STAR-switch Exterior | YES | YES | ||
| Interior smart stylish 4 button, black frame two wire CAN connection or wireless Bluetooth Communication or BOTH STAR-switch Interior | YES | YES | ||
| Add multiple STAR-switch blocks | YES | YES | ||
| Add STAR-touch display in addition to STAR-switch to control and dim LED’s, control devices. Can see power that devices are using. If CAN BMS is used, can see battery management system on display. If the new STAR-tank Radar module added, can see tank levels as well. If Scotty AI running, can see Alternator power | YES | YES |
COMPARISON OF CLASSIC AND SMART SWITCH
| Classic Switch | Smart Switch |
Alloy Body in Matt Black or Satin Silver | Yes | Yes |
4 Channel Switch that latches on when pressed | Yes | Yes |
Switch Dims as you hold the button | Yes | Yes |
Double press button turns LED high at any time | No | Yes |
Operates Devices like Pumps, heater control, LED light bars | Yes One Channel at 8A rest at 2A | Yes One Channel at 10A 2 at 5A and 4th fixed at 2A |
Dual Control from two identical switches to one set of 4 channel outputs | No | Yes |
Electrical Connection to devices to be switched | At the switch rear Plug 1 x 8A and 3 x 2A | At the Smart IO Board connected by RJ45 cable 1 x 10A , 2 x 5A , 1 x 2A |
GARMIN POWER SWITCH Combined with SAFIERY SMART SWITCH
This is a 6 channel switch with native 2 channel input plus smartphone app to control. Safiery add their Smart Switch for control of the remaining 4 channels (2 channels are controlled by the 2 control inputs from individually wired buttons. The Safiery Smart Switch has RJ45 connector and can be joined by another Smart Switch for dual switching of up to 4 buttons.
Each channel is 30A.
SAME LOOK AND FEEL AS SIMARINE DISPLAY OR VICTRON DISPLAY
A factory look is very important to Safiery. We designed our Classic Switch, Smart Switch and STAR-switch Interior to have the same identical height as the panel mount Simarine Pico or the Victron Touch 50 in the Panel Mount surround. There are also other Safiery devices that are compatible in size as well. We use as much Blue colour on Black in all these devices.
Gas Strut Switch for Automatic Lighting Control
This gas strut switch wires into the positive circuit for canopy door lights so that they come on automatically when opened. The switch is designed to close the circuit when it is opened and open the circuit when closed. It takes less than a few minutes to install on gas strut.
This is perfect for canopy doors to have "auto" light on when doors are opened.
Simply wire the positive wire through the gas strut switch. Turn the light switch on and "hey presto" when the door is opened, the light come on.
There is a significant discount for volume purchases.
Classic Switch Labels are Pre-printed
SELECTED LABELS TO CHOOSE FROM FOR INSTANT SHIPPING.
