Watch the Full Video Below
Programming STARSHIP: STAR-light with STAR-switch SP8 and STAR-switch SP4 and STAR-touch
- For single colour LEDs up to 10 can be switched and dimmed. 4 are positively switched and 6 are negatively switched.
If Devices are switched like water pump, these are on the positive with a limit of 4. - If Dual Colour LEDs are used, then one colour per channel
- If RGBW LED’s are chosen then select the second colour to cool white using the on-device colour wheel selector. This takes up 4 negatively switched channels.
- Then from a single button: Press once to control and dim the white colour, press the same button twice to switch to the alternative colour to control and dim.
- Provision with the provisioning selector on-device for up to 6 remote switches to activate the LED.
- Use a single remote switch as a master all on/off if required.
- Mosfet controlled and fuseless to LED’s
- Up to 8A per Channel at 12V only (100W nominal)
- 12V power and wireless. CAN connected.
TEN SINGLE COLOUR LED CHANNELS or FIVE DUAL COLOUR or ONE RGBW+ SIX
| STAR-light | Ten Individual LEDs 100W Each But 20A in Total | Four Dual Colour LED Strips 36W per Channel But 16A in Total | One RGBW LED Strips + Dual Colour 36W per Channel But 16A in Total |
| Channel 1 | LED 1 positive Switch | LED Strip 1 White positive Switch | LED Strip 1 White |
| Channel 2 | LED 2 positive Switch | LED Strip 1 Second Colour positive Switch | LED Strip 1 RGB(W) colour |
| Channel 3 | LED 3 positive Switch | LED Strip 2 White positive Switch | LED Strip 2 White |
| Channel 4 | LED 4 positive Switch | LED Strip 2 Second Colour positive Switch | LED Strip 2 Dual Colour colour Or Additional Single Colour LED |
| Channel 5 | LED 5 negative Switch | LED Strip 3 White positive Switch | |
| Channel 6 | LED 6 negative Switch | LED Strip 3 Second Colour positive Switch | |
| Channel 7 | LED 7 negative Switch | LED Strip 4 White positive Switch | |
| Channel 8 | LED 8 negative Switch | LED Strip 4 Second Colour positive Switch | |
| Channel 9 | LED 9 negative Switch | LED Strip 5 White positive Switch | |
| Channel 10 | LED 10 negative Switch | LED Strip 5 Second Colour positive Switch |
LED Lights/Strips can be one of three different types per module:
1) Positively dimmed & switched
2) Negatively dimmed & switched.
3) RGBW dimmed & switched.
Note If wired CAN connection used only 1 RGBW can be used with 1 Dual Colour LED
